Knowing he couldn't cruise around town in a stock truck, Rich dropped the truck off to Steve Hall of Virginia to bring the Silverado to correct heights. While in Steve's hands, the rear frame section would be equipped with a step notch allowing added room for axle travel. The notch being in place, bag mounts where welded in and a set of Firestone bags where put into their location.   Now with the rear done it was time to conquer the front heights. Steve would then install a set of DJM Upper and lower control arms, which came equipped with bag mounts. The mounts would then shortly be nuzzled up to a set of Firestone air bags for adjustability. For the quick lift on much needed occasions, electric valves where put to each corner with 3/8's inch line to bring the air through quickly.
|
 Now with the suspension complete the Alba Blitz 20x8.5 wheels wrapped in 245/40/ZR20 BFG rubber would receive more attention of the inner wheel wells. It was now time to work the exterior of the Silverado. While looking over Rich's truck you will notice first off the Goodmark steel cowl hood accompanied by a '00 Tahoe grill installed with billet inserts. 
|
