This is where is all went down, Street Beat Customs in Phoenix, Arizona. Give them a call if you're looking for a custom sliding ragtop for your vehicle.  First step was to remove the headliner and all the trim pieces that surrounded it. With a Tahoe, the roof is double-walled. Here, the inner layer is removed first with electric sheers.
|
There are three supports along the roof that will also need to be removed. Here you see the removal of one of the three. Here, John is removing the 2nd support. He uses an angle grinder equipped with a cut-off wheel Here, the slider frame is placed on the roof to find out exactly how far back the opening needs to start.
|
