 Step 5Once the ballasts are mounted and the wires are ran and tied up, plug in the wire harness to the ballast. Then ground the ground wire on the other side of the ballasts to a good ground.  Step 6Here is how I mounted mine if this gives you an idea of how big the ballasts are and how to mount them.
|
Source:Injen Technology244 Pioneer PlacePomona, CA 91768909-839-0706www.Injen.com Source:CATZ-FET926 Freeway Drive NorthBuilding #9Columbus, Ohio 43229800-267-1157www.FET-USA.com
|
