Photos
2007-08-12
2007-08-12
2007-08-12
2007-08-12
2007-08-12
2007-09-04
2007-09-04
2007-09-04
2007-09-04
2007-09-04
2007-09-04
2007-09-04
2007-09-04
2007-09-04
2008-01-01
Reso
2008-01-01
2008-01-10
2008-01-10
2008-01-10
hours before we left for reso
2008-01-10
2008-01-10
2008-01-10
2008-01-10
trying to put this dusty mess back together
2008-01-10
wooden cast for one off grill
2008-01-10
this is the mold I made for the grill
2008-01-10
first coat of glass
2008-01-10
fresh off the mold
2008-01-10
body worked and ready for primer
2008-01-10
next up for some sheet metal
2008-06-20
weber side draft
2008-06-20
hand made floor
2008-07-30
hand bent tunnel
2008-07-30
2008-10-10
2008-10-10
2008-10-10
2008-10-10
2008-10-10
2008-10-10
2010-12-07
2010-12-07
2010-12-07
2010-12-07
2010-10-10
2010-12-07
2008-08-02
2008-08-22
2010-12-07
2008-08-02
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2009-07-19
2008-08-02
2008-08-02
2008-08-02
2009-07-19
Engine
22r, Webber side draft carbs, header, other stuff on the way
Exterior
shaved everything, land rover headlights, range rover taillights, sheet metal floor with access door, outback hood scoop, Bed corners completely hand made to fit lights, front of hood and fenders hand made,suicide doors
Interior
sheet metal floor, complete one off interior, wrapp around dash, cluster moved to the center behind black acrilic,scion xb seats cut down
Suspension
Firestones in the front, arrnot industries sleeves in the back. Wishbone three link, 3 inch or so stock floor body drop, custom upper and lower control arms, drop spindles, 3/4 custom built frame with dual rails under the cab, Air Zennith Compressors, Accuair E level system
Wheels
20x7.5 lenso LS21
Nitto Neo Gen 225/30.20
Stereo
sponsered by Realm Audio: 600.4 for mids and highs, 800.1 for subs. Two 10 inch subs, two sets of 6.5 in componet sets.
