Street Source Magazine
Street Source Magazine

1994 Chevy Crew Cab Dually

2xtreme (4 owner profiles)
Owner: Carlos Lockamy
Purchased: 2008-04-01

Photos

2008-12-24
The Beast
The Beast 2008-06-07
TBC re-did my rear suspension
TBC re-did my rear suspension 2009-10-17
How it was when I picked it up from 2nd owner in 04/08
How it was when I picked it up from 2nd owner in 04/08 2008-12-24
What I found after I got it home and took the bed off
What I found after I got it home and took the bed off 2008-06-07
Ouch! This is what happens when you don't use thicker metal to bag a 3500 Crew Cab Dually
Ouch! This is what happens when you don't use thicker metal to bag a 3500 Crew Cab Dually 2008-06-07
Dropped off at TBC Customs
Dropped off at TBC Customs 2008-12-24
Tim of TBC getting it done
Tim of TBC getting it done 2008-12-24
Big Daddy Triple Stacks
Big Daddy Triple Stacks 2008-12-24
2008-12-24
2008-12-24
2008-12-24
15 inches of lift w/out the bed on
15 inches of lift w/out the bed on 2008-12-24
Thanks TBC and crew. www.tbcworks.com
Thanks TBC and crew. www.tbcworks.com 2008-12-24
Good Bye Handles
Good Bye Handles 2009-04-01
No More 3rd Brake Light
No More 3rd Brake Light 2009-04-01
Just before taking engine out
Just before taking engine out 2009-04-01
Getting ready to clean up firewall
Getting ready to clean up firewall 2009-04-01
Took out old square style dash. Gonna replace it with the newer rounded Chevy dash
Took out old square style dash. Gonna replace it with the newer rounded Chevy dash 2009-04-02
Always had good reliable service with Viair. These are the 480's.
Always had good reliable service with Viair. These are the 480's. 2009-04-13
Before Shot of firewall
Before Shot of firewall 2009-04-13
After Shot once firewall is smoothed and painted
After Shot once firewall is smoothed and painted 2009-08-22
All holes filled / reworked back of firewall under cowl so I can take the distributor out after engine is back in
All holes filled / reworked back of firewall under cowl so I can take the distributor out after engine is back in 2009-08-22
Frame forward painted
Frame forward painted 2009-08-22
Removed black powder coat, polished out, then clear powder coated
Removed black powder coat, polished out, then clear powder coated 2009-08-22
When someone doesn't want to work on your stuff, ya got to go and get it
When someone doesn't want to work on your stuff, ya got to go and get it 2010-04-21
My repossess motor, tranny, driveshaft and everything that was removed in April 09
My repossess motor, tranny, driveshaft and everything that was removed in April 09 2010-04-21
Currently at new shop. Heads off getting re-done, bottom half looks great after 125k miles
Currently at new shop. Heads off getting re-done, bottom half looks great after 125k miles 2010-04-21
Long time in the making
Long time in the making 2010-09-17
It ain't gonna jump in by itself...better get to it
It ain't gonna jump in by itself...better get to it 2010-09-17
Gettn there
Gettn there 2010-09-17
And the 2 shall become one
And the 2 shall become one 2010-09-17

Engine

454...Engine and tranny finally in. One more thing to check off the long list

Exterior

Went with PPG Silver Star / Vibrance Series

Interior

Gonna be competely re done

Suspension

Rear susp.done at TBC customs. Firewall and all other issues being done by Rich Hopkins at Rich's Rod Shop in Burlington NC.

Wheels

22 Alcoa's clear powder coated

Stereo

In Scuba Steve's car at the moment

Awards

<ST> Diamond in the back.

Future Plans

Take it back to Rich's so that he can tackle the rat's nest that is my wiring. Getting close to driveable