We started by removing the a and b pillars from the car. Both pillar covers just pull off with some effort involved. Next I pulled down the plastic molding that goes along the top of the back window, and turned the push clip about an inch away from it on the headliner to the liner was now loose in the back. Next we pulled down each sun visor and used a T25 torque to remove the visors. The clips for the visors will need to be turned sideways and pulled off.   
|
Next the handle on the passenger side (“Oh shit” handle) had to be removed, to do this you pull the cabs off either side and unscrew the Phillips head screws on both sides. The handle will then pull off. The hanger clip in the back is also held on by a Phillips screw. Next you will need to remove the clear plastic covers from the map light, and dome light. To do this you can either use a small fine flat head screw driver, or a fiber stick.   
|
