When you first buy a vehicle there are many thoughts that go through ones mind. In our case, a 2002 Nissan Altima would be hard to customize being such a new vehicle. Luck for us Trenz very own David Courtney comes to the site from time to time, and on occasion sends us new product release information. One of those new products just so happened to be a Trenz billet grill for this particular Altima. After a couple of phone discussions the grill was on its way. With this particular install, everything went smooth and there was no modifications needed for fit. 
|
1. First off you will need to remove the stock grill from the vehicle 2. To remove the stock grill, first you must take out the top four stock plastic rivets by pulling the middle part of the rivet out. We did this with a use of a flat head screwdriver to pop the centers up. That will enable you to pull the rest of rivet out.
|
