   Next Justin would work over the suspension of his blazer. For starters the rear frame rails would be notched along with the drive shaft tunnel. Air Ride Technologies air bags would then be installed at all corners along with Nitro drop shocks for a good ride.
|
To bring the front down with the rear a set of 3 inch Bell Tech spindles would be installed. Also installed into the air ride system would be two 3 gallon air tanks along with 1 compressor. Behind the 20x8.5 MOMO M1 wheels wrapped in Nitto rubber you’ll find a set of Ceramic brakes along with steel braided line.  
|
