Knowing that the cool kids drag body, Ryan would turn to Dawg House Kustoms of Milwaukie, OR for a 3-inch body drop. Helping get things down, the rear frame rails would be equipped with an MIC 6-piece notch along with notching the control arms for extra low.    Not quite getting things down, a set of trailing arms with panhard bar would be installed. On all four corners Belltech shocks would be installed to ensure a nice ride.
|
 Upfront a set of Belltech 2-inch drop spindles would be bolted up and a set of 2600lb Firestone bags would be found at each corner. An optima redtop battery would be relocated into the bed allowing more room for the 20 inch KMC Toads wrapped in 235/40 Nitto tires. The drop complete, the body would then need to be worked over. The front bumper and grille would be ditched for a painted and polished set housing a frenched in license plate to the bumper. 
|
